Lun18012021

Derniere mise a jour02:05:48 PM

SCREEN

Profile

Layout

Menu Style

Cpanel

Equipes Machines Electriques

 Works published by the LRE (papers of two teams of the laboratory: Electrical Machines teams) in IEEE (Conferences)*

*Ces travaux, qui donnent un aperçu général sur les thèmes et sujets de recherche abordés par le Laboratoire (avec ses 2 équipes), sont disponibles sur le site : http://ieeexplore.ieee.org, toutefois, le LRE peut être contacté.

Année 2014

K. Boughrara, R. Ibtiouen and N. Takorabet, “Analytic Calculation of Magnetic Field and Electromagnetic Performances of Spoke Type IPM Topologies with Auxiliary Magnets”, IEEE Conference on Electrical Machines (ICEM 2014), Berlin, Septembre 2014.

Bouzida, A; Touhami, O; Ibtiouen, R, “Rotor fault diagnosis using external search coils voltage analysis”, IEEE International Conference on  Electrical Machines (ICEM), Year: 2014, Page(s): 1654 – 1658.

Zebbadji, T. ; Hadji, S. ; Ibtiouen, R, “A simplified average model and analysis for an n-parallel connected inverters”,  IEEE Conference on Control and Modeling for Power Electronics (COMPEL),Year: 2014 , Page(s): 1 – 8.

Boughrara, K. ; Ibtiouen, R, “Analytical modeling of double cage rotor induction motors in healthy and broken bars conditions”,  IEEE Conference  on Electrical Sciences and Technologies in Maghreb (CISTEM), Year: 2014 , Page(s): 1 – 8.

Tahi, S. ; Ibtiouen, R. ; Mekhtoub, S, “Performance optimization of synchronous reluctance machines with two rotor structures”, IEEE Conference on Electrical Machines (ICEM), Year: 2014, Page(s): 250 - 255 IEEE.

Metatla, S. ; Mekhtoub, S. ; Ibtiouen, R. ; Nesba, A, “Dynamic behavior of doubly fed induction generator during network voltage dips”,  IEEE Conference on Electrical Sciences and Technologies in Maghreb (CISTEM), Year: 2014, Page(s): 1 – 6.

Debbah, N. ; Ibtiouen, R. ; Amara, Y, “New line-starting method of synchronous motors not having damping windings”,  IEEE Conference on Electrical Sciences and Technologies in Maghreb (CISTEM), Year: 2014 , Page(s): 1 – 5.  

Tahi, S. ; Ibtiouen, R, “Finite element calculation of the dq-axes inductances and torque of synchronous reluctance motor”,  IEEE Conference on Electrical Sciences and Technologies in Maghreb (CISTEM), Year: 2014, Page(s): 1 – 5.

Année 2013

Hamdani, S. ; Touhami, O.; Ibtiouen, R. ; Hasni, M, “Analytical evaluation of inductances for induction machine with dynamic eccentricity using MWFA and FE methods”,  IEEE Conference on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED), Year: 2013, Page(s): 420 – 427.

Hasni, M. ; Hamdani, S. ; Taibi, Z.M. ; Touhami, O. ; Ibtiouen, R. ; Rezzoug, A, “Faults diagnosis of induction machine by using feed-forward neural networks and genetic algorithms”,  IEEE Conference on Control Conference (ASCC), Year: 2013, Page(s): 1 – 6.  

Année 2012

Hamdani, S. ; Mezerreg, H.; Boutikar, B. ; Lahcene, N. ; Touhami, O. ; Ibtiouen, R, “Rotor fault diagnosis in a Squirrel-Cage Induction Machine using support vector”,  IEEE Conference on Electrical Machines (ICEM), Year: 2012 , Page(s): 1817 – 1822.

Boutora, Y. ; Ibtiouen, R. ; Takorabet, N, “Analytical model of parallel magnetized magnet segments of surface PM slotless machine”,  IEEE Conference on Electrical Machines (ICEM), Year: 2012, Page(s): 2772 – 2778.

Boughrara, K. ; Ibtiouen, R. ; Touhami, O, “Exact analytical prediction of magnetic field in a hybrid and wound excitation synchronous machine”,  IEEE Conference on Electrical Machines (ICEM), Year: 2012, Page(s): 2818 – 2824.

Année 2011

Sid, O. ; Menaa, M.; Hamdani, S. ; Touhami, O. ; Ibtiouen, R, “Self-organizing map approach for classification of electricals rotor faults in induction motors”,  IEEE Conference onElectric Power and Energy Conversion Systems (EPECS), Year: 2011, Page(s): 1 – 6.

Hamdani, S. ; Touhami, O. ; Ibtiouen, R.; Fadel, M, “Neural network technique for induction motor rotor faults classification-dynamic eccentricity and broken bar faults”,  IEEE Conference Diagnostics for Electric Machines, Power Electronics & Drives (SDEMPED), Year: 2011, Page(s): 626 – 631.

Taibi, Z.M. ; Hasni, M. ; Hamdani, S. ; Rahmani, O. ; Touhami, O. ; Ibtiouen, R, “Optimization of the feedforward neural network for rotor cage fault diagnosis in three-phase induction motors”,  IEEE Conference on Electric Machines & Drives Conference (IEMDC), Year: 2011, Page(s): 194 – 199.

Année 2010 

Bencheikh, Y.;Ouazir, Y.; Ibtiouen, R, “Analysis of capacitively driven electromagnetic coil guns”, IEEE International Conference on Electrical Machines (ICEM), Year: 2010 , Page(s): 1 – 5.

Bencheikh, Y.; Ouazir, Y.; Ibtiouen, R, “Tubular Linear Induction Motor analysis by using finite elements and current filament models”, IEEE International Conference on Electrical Machines (ICEM), Year: 2010, Page(s): 1 – 6.

Bouzida, A.; Hamdani, S.; Touhami, O.; Ibtiouen, R.; Fadel, M.; Rezzoug, A, “An experimental study on stator and rotor defects of squirrel cage induction machines”, IEEE Conferences on Electrical Machines (ICEM), Year: 2010, Page(s): 1 – 5.

Touati, S. ; Ibtiouen, R. ; Touhami, O.; Djerdir, A, “Fast multi objective optimization of an automotive PMSM using mixed BEM with genetic algorithms”,  IEEE Conference on Vehicle Power and Propulsion Conference (VPPC), Year: 2010, Page(s): 1 – 4.

Mourad, H. ; Omar, T. ; Rachid, I.; Fadel, M. ; Caux, S, “Modelling and parameter identification of synchronous machine by PWM excitation signals”, IEEE Conference on Power Electronics Electrical Drives Automation and Motion (SPEEDAM), Year: 2010, Page(s): 442 – 447.

Année 2009

Nesba, A.; Ibtiouen, R.; Mekhtoub, S.;Touhami, O.; Bacha, S.; Riu, D.; Benhaddadi, M, “Analysis of self-excited induction generator feeding DC loads for low-cost renewable energy applications”, IEEE Electric Machines and Drives Conference (IEMDC), Year: 2009, Page(s): 812 – 817.

Mourad, Hasni. ; Omar, Touhami. ; Rachid, Ibtiouen. ; Fadel, M. ; Caux, S, “Parameter identification of synchronous machine by dc chopper excitation signals”,  IEEE Conference on Electrical and Electronics Engineering (ELECO), Year: 2009, Page(s): I-211 - I-215.

Année 2008

Hamdani, S.; Bouzida, A.; Touhami, O.; Ibtiouen, R, “Diagnosis of rotor fault in induction motor using the MUSIC analysis of the terminal voltage after switch-off”, IEEE Conferences on Electrical Machines (ICELMACH),Year: 2008 , Page(s): 1 – 5.

Hasni, M.; Touhami, O.; Ibtiouen, R.; Fadel, M.; Caux, S, “Estimation of synchronous machine parameter by standstill frequency response tests”, IEEE Conferences onIndustrial Technology (ICIT), Year: 2008, Page(s): 1 – 6.

Touhami, O.; Mehenoun, M.; Mahmoudi, M.O.; Benakba, N, “Determination of squirrel cage induction machine parameters including skin effect in steady-state operation”,  IEEE Conferences on Industrial Technology (ICIT), Year: 2008, Page(s): 1 – 6.

Année 2007 

Mekhtoub, S.; Ibtiouen,R.; Touhami, O.; Bacha, S, “Analysis of transient currents of the connected self- excited induction generator following disturbance on the system supply”, IEEE Conferences on Electrical Machines and Power Electronics (ACEMP), Year: 2007 , Page(s): 696 – 700.

Moulahoum, S.; Touhami, O.; Ibtiouen, R.; Fadel, M, “Induction Machine Modeling With Saturation and Series Iron Losses Resistance”, IEEE Electric Machines & Drives Conference (IEMDC). Year: 2007, Page(s): 1067 – 1072.

Nesba, A.; Ibtiouen, R.; Mekhtoub, S.; Touhami, O.; Bacha, S, “Low-Cost Wind Generator for Supplying Isolated DC loads”, IEEE Conferences on Clean Electrical Power (ICCEP), Year: 2007, Page(s): 690 – 695. 

Menaa, M.; Touhami, O.; Ibtiouen, R.; Fadel, M, “Speed Sensorless Vector Control of an Induction Motor using Spiral Vector Model-ECKF and ANN Controller”, IEEE Conferences on Electric Machines & Drives (IEMDC), Year: 2007, Page(s): 1165 – 1170.

Touhami, O.; Fadel, M, “Faults Diagnosis by Parameter Identification of the Squirrel Cage Induction Machine”, IEEE Conferences on Electric Machines & Drives Conference (IEMDC), Year: 2007, Page(s): 821 – 825.

Touhami, O.; Fadel, M, “Detection of Broken Rotor Bars and Stator Faults in Squirrel-Cage Induction Machine by Spectral Analysis”, IEEE Conferences on System Theory (SSST), Year: 2007, Page(s): 274 – 278. 

Année 2006 

Boutora, Y.; Takorabet, N.; Ibtiouen, R.; Mezani, S, “A New Proposed Method for Minimizing the Bandwidth and Skyline Storage for Triangular Finite Elements Meshes”, IEEE Conference Electromagnetic Field Computation (CEFC), Year: 2006, Page(s): 47.

Takorabet, N.; Lateb, R.; Mezani, S.; Ouazir, Y.; Meibody-Tabar, F.; Ibtiouen, R, “Computation of the effect of Space Harmonics on the Performances of a Cage Induction Motor Using Time Harmonic and Time Stepping Methods, IEEE Conference Electromagnetic Field Computation (CEFC), Year: 2006, Page(s): 183.

H. Bouzida; O. Touhami; R. Ibtiouen; M. Fadel; M. Benhaddadi; Olivier G, “Model Structures Used in Rotor Defect Identification of a Squirrel Cage Induction Machine”, IEEE ConferencesElectrical and Computer Engineering (CCECE), Year: 2006, Page(s): 1671 – 1676.

Touhami, O.; Noureddine, L.; Ibtiouen, R.; Fadel, M, “Diagnosis of induction machine rotor defects from an approach of magnetically coupled multiple circuits”, IEEE ConferencesSystem Theory (SSST), Year: 2006, Page(s): 492 – 496.

Touhami, O.; Ferhi-Hamis, M, “Reduction of the model order of permanent magnet synchronous machine using Gerschgorin's circles and singular perturbations”, IEEE ConferencesSystem Theory (SSST), Year: 2006, Page(s): 482 – 486.

Moulahoum, S.; Touhami, O.; Rezzoug, A.; Baghli, L, “Speed Sensorless Vector Controlled Induction Machine in Flux Weakening Region”, IEEE Conferences Industrial Electronics (IECON), Year: 2006, Page(s): 1206-1211.

Mezouar, A.; Fellah, M.K.; Hadjeri, S.; Touhami, O.; Sahali, Y, “Robust Direct Field Oriented Control of Induction Motors Using Adaptive Observer”,IEEE ConferencesIndustrial Electronics, Year: 2006, Page(s): 2297 – 2302.

Année 2005 

Touhami, O.; Noureddine, L.; Ibtiouen, R, “Spectral analysis for the rotor defects diagnosis of an induction machine”, IEEE Conferences on Intelligent Signal Processing (WISP), Year: 2005, Page(s): 183 – 187.

Boughrara, K.; Ibtiouen, R.; Touhami, O, “Numerical analysis of brushless permanent magnet motors using Lagrange multiplier”, IEEE Conferences on Industrial Electronics Society (IECON), Year: 2005.

Moulahoum, S.; Touhami, O, “An approach to an induction machine modeling in presence of saturation and iron loss”, IEEE Conferences on Power Engineering Society (PES), Year: 2005, Page(s): 2272 – 2276.

Année 2004

Touhami, O.; Ibtiouen, R.; Mekhtoub, S.; Mghezzi, L.-M, “Application of Butterworth filter for parameter identification of an induction machine”, IEEE International Conference on Industrial Technology (ICIT), Year: 2004, Page(s): 1331 – 1337.

Touhami, O.; Mezouar, A.E.K.; Ibtiouen, R.; Mekhtoub, S, “Dynamics separation of induction machine models using gerschgorin's circles and singular perturbations”, IEEE Conferences on Electrical and Electronics Engineering (ICEEE). Year: 2004, Page(s): 549 – 556.

Touhami, O.; Mezouar, A.E.K.; Ibtiouen, R.; Mekhtoub, S, “Sliding mode control and flux observer for a singularly perturbed model of an induction machine”, IEEE Conferences on Industrial Technology (ICIT), Year: 2004, Page(s): 108 – 114.

Boukhelifa, A.; Kherbouch, M.; Cheriti, A.; Ibtiouen, R.; Touhami, O.;Tahmi, R, “Stator current minimization by field optimization in induction machine”, IEEE Conferences on Electrical, Electronic and Computer Engineering (ICEEC), Year: 2004, Page(s): 839 – 842.

Année 2003 

Menaa, M.; Touhami, O.; Ibtiouen, R, “Estimation of rotor resistance of an induction motor using extended Kalman filter and spiral vector theory”, IEEE Conferences on Control Applications (CCA), Year: 2003, Page(s): 1262 – 1266.

Menaa, M.; Touhami, O.; Ibtiouen, R, “Estimation of the rotor resistance in induction motor by application of the spiral vector theory associate to extended Kalman filter”, IEEE Conferences on System Theory (SSST), Year: 2003, Page(s): 211 – 216.

Ibtiouen, R.;Kechroud, R.; Touhami, O.; Mekhtoub, S, “Complex finite element analysis of a solid rotor induction motor”, IEEE Electric Machines and Drives Conference (IEMDC), Year: 2003, Page(s): 1606 – 1610.

Ibtiouen, R.; Touhami, O.; Mghezzi, L.M.; Mekhtoub, S.; Mezani, S, “MIMO and MISO systems applied to an induction machine parameter identification”, IEEE Conferences on Control Applications (CCA), Year: 2003, Page(s): 1251 – 1255.

Année 2001

Ibtiouen, R.; Mezani, S.; Touhami, O.; Nouali, N.; Benhaddadi, M, “Application of lumped parameters and finite element methods to the thermal modeling of an induction motor”, IEEE Conferences on Electric Machines and Drives (IEMDC), Year: 2001, Page(s): 505 – 507.

Année 2000

Touhami, O.; Ibtiouen, R.; Guechtouli, A.; Iung, C, “Identification of SIMO system: application to an induction machine”, IEEE Conferences on Industry Applications (IAS), Year: 2000, Page(s): 1148 -1152.

Année 1998

Menaa, M. ; Touhami, O.; Ibtiouen, R. ; Iung, C, “Vector control of induction motor by a spiral vector theory”, IEEE Conference on Control Applications (CCA), Year: 1998, Page(s): 1265 – 1270.